NEWS CENTER
Modern enterprise of water supplies integrating research, development, production and sales

NEWS

Check category

NEWS

Weihai JS Yacht Co., Ltd.

Contact: Kevin Song

Tel:+86-18766313696

Tel:+86-631-5761739    +86-631-5764327

E-mail:js003@jsyacht.cn

Add:Ruanjiakou Industrial Park, Yangting Town, Huancui District, Weihai City

​Alibaba: https://jsyacht.en.alibaba.com/

 

What to pay attention to before using an inflatable rubber boat

(Summary description)The owner of each boat should wear appropriate clothing and be equipped with life jackets and other personal life-saving equipment of acceptable quality.

What to pay attention to before using an inflatable rubber boat

(Summary description)The owner of each boat should wear appropriate clothing and be equipped with life jackets and other personal life-saving equipment of acceptable quality.

Information
Pay attention to the following before leaving
1. The owner of each boat should wear appropriate clothing and be equipped with life jackets and other personal life-saving equipment of acceptable quality.
2. Make sure that all basic equipment including paddles and pumps have been placed on the deck, and prepare additional safety equipment for possible hazards.
3. Please do not use the boat alone after taking medicine or drinking alcohol.
4. The load must be evenly distributed. If you use the outboard motor with a light load, do not accelerate suddenly. The operator's wrong operation may adversely affect the stability and handling performance of the ship.
5. Please configure the outboard motor for the boat within the range allowed by the performance index. Please do not overload.
6. Incorrect use of the outboard motor will cause incalculable damage to the user. We will not configure any outboard motors without quality certification for our boats. Please do not drive at high speeds where there are swimmers, and do not allow swimmers to approach the boat while the motor is still running.
7. Please pay attention to the residual amount of fuel at any time.
8. Do not venture into unfamiliar waters without any information.
9. Always leave your departure information (time, place) before departure, and reserve the time and place where you plan to return.
10. Navigation lights may be necessary. Users are advised not to sail at night and in bad weather unless the navigation system is properly installed and used.
11. Safety courses on the operation of small boats can be learned from national or private organizations in most countries. Before you use the boat, you should have a clear understanding of the general waterway management regulations and local water environment management regulations.
12. During the long voyage, you should always put the safety equipment such as bell pants, first aid kit, anchor, etc. in the most important position.
Inflate and deflate
1. Please inflate the small boat with the foot pedal pump provided by us. Note: When you use a foot pump to inflate the boat, please do not fill it too full. If you are using an electric inflator, please switch to a foot pump when it is about to be full, in order to control the air pressure in the boat beyond the appropriate range.
2. The ultimate pressure of the boat itself is 0, 25bar, and the ultimate pressure of the inflatable keel is 0, 35bar. Depending on the climate and working environment, when the boat is in use, the pressure in the boat needs to be controlled to maintain it within a suitable range.
3. When the small boat is inflated for 2 to 3 days, it may be necessary to supplement the inflation to make the air pressure in the gas chamber meet the requirements for use. Special Note: Please do not use compressed air source (such as the car's automatic tire inflation air compressor) to inflate the small boat. Over-inflation may cause the seam of the small boat and the diaphragm of the air chamber to break and become unusable.
4. When inflating or deflating, please pay attention to maintaining the air pressure balance between the air chambers to avoid damage to the air chamber septum.
load
1. The maximum load of the boat is marked on the stern plate. Please do not exceed the rated load.
2. Every member should wear a life jacket (personal floating equipment).
3. Both the oars and maintenance tools should be placed on the deck for emergency needs.
4. All the loads on the ship should be evenly distributed to ensure that the boat can keep stable during the travel
Operation: Boating
1. The standard configuration of the inflatable boat includes twin paddles, paddles and rowing seats. Make sure that the rowing seat is installed in place.
2. Fix the propeller nut of the double propeller on the propeller bolt. Note: Please do not use sculls as levers, they are fragile!
3. You must understand the situation of the local waters before deciding whether to use the outboard engine or the paddle. The power of the dinghy is not enough to resist the tidal currents of the inlet of the harbour and the waves of the sea, nor can it be driven in extremely narrow passages or sail in shallows.
Weihai Jieshi yacht, aluminum alloy fishing boat, drift boat manufacturer, SUP paddle board manufacturer, aluminum alloy rubber boat, sup inflatable paddle version

Scan the QR code to read on your phone

Next: None
Next: None

WRITE A MESSAGE TO US

Username used for comment:
Feedback of customer
Description:
验证码

CONTACT US

Weihai JS Yacht Co., Ltd.

Contact: Kevin Song

Tel:+86-18766313696

Tel:+86-631-5761739    +86-631-5764327

E-mail:js003@jsyacht.cn

Add:Ruanjiakou Industrial Park, Yangting Town, Huancui District, Weihai City

Alibaba: https://jsyacht.en.alibaba.com/

 

 

Weihai Jieshi Yacht

MESSAGE

Username used for comment:
Feedback of customer
Description:
验证码

Copyright 2020 Weihai JS Yacht Co., Ltd. All rights reserved       Powered by www.300.cn       鲁ICP备16038370号-1